outdoor poe repeater over 2-wire (slave) POT-1110 h/w version: 1 the pot system, one master & one slave units, provide a long-reach ethernet extension with remote power- over-ethernet (poe) capability over a 2-wire line. connection with a class 0 pd device, the distance of two-wire 24awg cables can be up to 400 meters when using a 48watt high power poe switch, fsw-0513/0543. users may select a fxed data rate for diferent copper line ranging. the maximum data rate can be up to 60 mbps full duplex for 2-wire line. the pot master unit is powered by the local poe ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. the remote unit regenerates the power and provides the poe capability to power up the remote pd device up to 15 watts when connecting to 48watt high power switch, fsw-0513. the pot m/s supports the indoor & outdoor models with wall-mount feature. equipped with dip switches, the 2-wire line speed can be confgured to meet diferent line gauges and distances. a pot pair ofers a cost efective solution for remote power applications such as lan-to-lan connectivity, video streaming, fttb, and mdu/mtu over single twisted line. ip65 POT-1110 is ip65-compliant meaning it is weatherproof from snow, rain, typhoons, desert heat, etc. this poe repeater is up to the challenge for deployment in any harsh weather condition! key features - two-wire cables are used to connect 100mbps fast ethernet poe devices - maximum distance up to 400 meters for 24 awg cable - maximum data rate up to 60mbps full duplex - remote poe capability for pd devices of wifi ap, ip camera, ip telephones - up to 15 watts for remote poe, depending on pse power - easy installation by indoor & outdoor diferent models - dip switches for 2-wire line rate settings - low-latency for video/voice/data applications - ip65 weatherproof poi-4000 high-power poe injector works well with 1. rj45 in 2. rj45 out fsw-0513 4-port high power poe switch 1 2 2
poe pd/pse www.level1.com i one world_one brand_one level_ line interface data rate: 60/60 mbps power: 48v rj-11 connector x 1 lan interface auto-detection for 10/100 base-tx and half / full duplex full compatible with ieee 802.3 / ieee802.3u automatic mdix function rj-45 connector x 1 pse output voltage within 44~57v safety-extra-low-voltage (selv) compliant maximum output power 15 watts technical specifcation physical dimension ( l x w x h ): 180mm x 165mm x 95mm operating environment: humidity: 5% ~95% non-condensing temperature: 0~50c regulatory compliance: fcc rules part 15 ce product diagram ethernet cable (rj-45) poe (power + data) rj-11 phone line (power + data) POT-1110 non-poe switch fsw-0513 100m poe pd devices note: these distances are typical results when used with 24awg rj-11 cable pot-0100 1m 48w up to 400m for 2 wire POT-1110 non-poe switch poi-4000 100m poe pd devices pot-0100 1m 40w up to 300m for 2 wire indoor to outdoor solution indoor to outdoor solution installation notes up up up 3
order information POT-1110: outdoor poe repeater over 2-wire (slave) package contents POT-1110 x 1 user manual x 1 mounting kit x 1 all mentioned brand names are registered trademarks and property of their owners. technical specifcations are subject to change without notice. ? copyright digital data communications gmbh. all rights reserved. v1.0 4
|
